9-5 SE Sedan (9600) V6-3.0L Turbo (B308) (1999)
Maintenance Required Lamp/Indicator: Technical Service Bulletins
SID Message - `Time For Service' Clearing
SI No. 381-1933
PI No.
Date: April 1998
Distr. all
9-5
SID Message "Time for Service"
Cars concerned
All Saab 9-5
Background
New software in SID requires a different procedure to reset the "TIME FOR SERVICE" message when using the SID CLEAR button.
Note that if you are using Tech 2 the normal clearing procedure can be followed.
Procedure
To reset "TIME FOR SERVICE" message on SID (not using Tech 2), do the following:
1
Press CLEAR button once.
2
Press CLEAR once more for at least 8 seconds. SID will beep once, then again. On the 2nd beep it will flash "SERVICE".
3
Recycle the key to verify you have cleared the message.